3 Series E46 316i (M43TU) SAL
Block output flange using special tool 23 0 020.
Unfasten collar nut with special tool 23 1 210.
Pull off output flange.
Note:
If ease-of-movement is impaired, remove output flange with
special tool 33 1 150.
Remove radial seal with special tool 00 5 010.
Remove cap (1).
RA Complete removal and installation of input and output shafts (S5D 200G/ 250G)
BMW AG - TIS
19.01.2013 11:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -