3 Series E46 316i (M43TU) SAL
Lower transmission until cylinder head touches bulkhead.
Suspend special tool 11 8 022 from left and right control arms.
Caution!
Position special tool so that engine oil sump is securely
resting on special tool.
Tighten down knurled screws until special tool rests against
engine oil sump.
Unlock and remove cable connector (1).
Unclip cable from transmission housing.
Release screw (1).
Withdraw hydraulic lines (2) to oil cooler from transmission
housing.
Installation:
Replace sealing rings.
Remove cover.
RA Removing and installing automatic transmission (A5S 360R / 390R, A4S 200R)
BMW AG - TIS
19.01.2013 11:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
