3 Series E46 316i (M43TU) SAL
Open drain plug (1).
Tightening torque, 24 11 6AZ.
Drain off automatic transmission fluid.
Unscrew all bolts.
Remove oil sump (2).
Detach gasket from oil sump (2).
Clean sealing faces.
Installation:
Replace sealing ring on drain plug.
Fit new gasket on oil sump.
Clean magnets (1) and reinstall in oil sump.
Install oil sump.
Insert all screws until contact is made with screw head in each
case.
Caution!
Tighten down screws, not in diagonal sequence but rather in
order, 1x to specified torque.
Tightening torque, 24 11 5AZ.
RA Removing and installing/sealing or replacing transmission fluid sump (A5S 360R /
BMW AG - TIS
19.01.2013 11:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
