3 Series E46 316i (M43TU) SAL
Insert feeler gauge (1) between detent spring (2) and detent
disk (3) and set gap of 0.80 mm by moving detent spring (2).
Tighten down screws (4).
Tightening torque, 24 30 1AZ .
RA Removing and installing/replacing selector unit (A5S 360R/390R, A4S 200R)
BMW AG - TIS
19.01.2013 11:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
