3 Series E46 316i (M43TU) SAL
24 32 550
Replacing pressure regulator for converter
lockup clutch (AS5 360R/390R, A4S 200R)
Important!
After completion of work, check transmission oil level.
Use only the approved transmission fluid in this automatic
transmission.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Necessary preliminary tasks:
•
Loosen shift unit by untwisting (approx. 4 turns) all 8 outside
torx screws and 1 hexagon screw.
Remove retaining spring.
Pull out pressure regulator (1) for converter lockup clutch.
Installation:
Coat new pressure regulator (1) for converter lockup clutch
with automatic transmission fluid.
RA Replacing pressure regulator for converter lockup clutch (AS5 360R/390R, A4S 200
BMW AG - TIS
19.01.2013 12:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
