3 Series E46 316i (M43TU) SAL
Screw special tool 24 5 361 into radial shaft seal.
Screw special tool 24 5 362 onto special tool 24 5 361 and
tighten down.
This pulls the radial shaft seal out of the transmission housing.
Screw adapter sleeve (1) from seal set onto manual shift valve
shaft.
Moisten sealing lips of radial shaft seal (2) with automatic
transmission fluid.
Push radial shaft seal (2) onto manual shift valve shaft. Press
radial shaft seal (2) as far as possible into transmission housing.
Grip radial shaft seal (2) firmly.
Unscrew adapter sleeve (1) from manual shift valve shaft.
Pull radial shaft seal into transmission housing up to stop with
special tools 24 5 363 and 24 5 364 .
Installation:
Adjust selector lever.
RA Replacing radial shaft seal for manual shift valve shaft (A5S 360R / 390R, A4S 2
BMW AG - TIS
19.01.2013 12:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
