3 Series E46 316i (M43TU) SAL
1.)
Test:
Set torque wrench to 60 Nm.
Introduce a force with hook wrench (1) in the direction
shown until torque is obtained.
Read off test result:
-
Red LED flashes: Joint must be replaced
-
Green LED flashes: Carry out 2nd test
2.)
Test:
Reposition hook wrench.
Introduce a force with hook wrench (1) in the direction
shown until torque is obtained.
Read off test result:
-
Red LED flashes: Joint must be replaced
-
Green LED flashes: Joint must not be replaced
RA Measuring play of wheel control joints
BMW AG - TIS
19.01.2013 12:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
