3 Series E46 316i (M43TU) SAL
31 31 ...
Instructions on handling the BMW spring
tensioner
Note:
The following description refers exclusively to the spring tensioner
currently sold by BMW.
Older spring tensioners may only be used in the model series
mentioned in the relevant repair instructions if there are no
corresponding spring holders for the current spring tensioners.
The spring tensioner may only be used in conjunction with the
relevant BMW repair instruction (latest edition).
Warning!
Observe the following instructions to avoid any risk of injury by
the coil springs.
1.
Prior to each use, check the special tools for defects,
modifications and operational reliability.
2.
Damaged/modified special tools must not be used!
3.
No changes or modifications may be made to the special
tools!
4.
These special tools are intended solely for the purpose
of tightening and relieving cylindrical and tapered
suspension springs.
5.
Keep special tools dry, clean and free of grease.
6.
Impact screwdrivers may not be used!
7.
Do not compress coil spring to full extent.
8.
Observe manufacturer's instructions.
•
The corresponding spring strut must always be removed
completely beforehand.
RA Instructions on handling the BMW spring tensioner
BMW AG - TIS
19.01.2013 12:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
