3 Series E46 316i (M43TU) SAL
32 32 050
Removing and installing/replacing steering
lock cylinder
Special tools required:
•
32 3 110
Necessary preliminary tasks:
•
Remove ring antenna
If necessary, unlock interlock cable through bore (1).
Turn ignition key to "R" position.
Insert special tool 32 3 110 into release opening (arrow) and
remove lock cylinder.
Note:
Lock (1) is unlocked with special tool 32 3 110 and the lock
cylinder can now be removed. If necessary, turn special tool in
hole.
RA Removing and installing/replacing steering lock cylinder
BMW AG - TIS
19.01.2013 12:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
