3 Series E46 316i (M43TU) SAL
32 41 380
Removing and installing or replacing oil
cooler/cooling coil for power steering
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Seal off hydraulic lines with plugs.
Necessary preliminary tasks:
•
Draw off and dispose off hydraulic fluid from fluid reservoir
•
Disconnect quick-connect couplings on cooling coil
Remove radiator.
Remove cooling coil from radiator.
After installation:
•
Top up hydraulic fluid and bleed system
•
Check pipe connections for leaks
RA Removing and installing or replacing oil cooler/cooling coil for power steering
BMW AG - TIS
19.01.2013 12:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
