3 Series E46 316i (M43TU) SAL
33 55 000
Removing and installing / replacing rear
stabilizer bar
Remove spare wheel (1) from spare wheel recess.
Release screw (2).
Release screws (1) and remove spare wheel recess (2).
Release screws (1) on bearing pedestal stabilizer link.
Release screws (1).
Remove stabilizer bar with rubber mounts from control arm at top
and from rear axle carrier.
Note:
For installation and removal, remove bearing pedestal if
necessary.
Installation:
Stabilizer bar and rubber mount free of grease. Coat retaining
bracket with Circolight, refer to BMW Parts Service.
RA Removing and installing / replacing rear stabilizer bar
BMW AG - TIS
19.01.2013 13:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
