3 Series E46 316i (M43TU) SAL
34 00 048
Bleeding brake system with ABS/ASC+T
Note:
Note "General Data",
refer to 34 00 ...
Connect BMW Diagnosis and Information System (DIS).
Call up service function Bleeding ABS/ASC+T Hydraulics.
Connect bleeding unit to expansion tank and switch on.
Note:
Check relevant operating instructions for each device.
Charging pressure must not exceed 2 bar.
Flush braking system completely.
Connect bleeder hose and bottle to bleed valve on rear right brake
caliper.
Open bleed valve and flush until clear, bubble-free brake fluid
emerges.
Close bleeder valve.
Follow same procedure on rear left, front right and front left wheel
brake.
Bleed rear-axle brake circuit.
To bleed the rear wheel brake, follow the procedure specified in
the DIS (Diagnosis Information System).
RA Bleeding brake system with ABS/ASC+T
BMW AG - TIS
19.01.2013 13:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
