3 Series E46 316i (M43TU) SAL
34 11 552
Overhauling left or right front-brake caliper
(brake caliper removed)
Note:
Use repair kit,
refer to BMW Parts Service.
Take off plastic caps (1).
Unscrew guide bolts (2).
Installation:
Only clean guide screws; do not grease. Check guide bolts,
replace if necessary.
Tightening torque, 34 11 3AZ.
Dismantle brake caliper and remove brake linings.
Installation:
Press brake lining fully outwards and insert spring (4).
Warning!
In the following work step, large forces occur at the brake
caliper piston (up to more than
2800 N!).
Danger of injury!
RA Overhauling left or right front-brake caliper (brake caliper removed)
BMW AG - TIS
19.01.2013 13:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
