3 Series E46 316i (M43TU) SAL
34 11 667
Fine-grinding both sides of both front brake
disks (brake disks removed)
Caution!
Always fine-grind both sides of both brake disks on one axle.
Observe max. machining dimension on each friction ring side,
minimum brake disk thickness (MIN TH)
and surface roughness of braking surfaces.
Brake disks of M models (Compound brake disks) must not
be machined!
Note:
On brake disks which have been lathe-turned to the minimum
brake disk thickness (MIN TH),
refer to Technical Data,
only one brake lining set may still be used up.
Grinding machine, refer to BMW Service Workshop Equipment
Planning documentation.
Follow the machine manufacturer's operating instructions.
RA Fine-grinding both sides of both front brake disks (brake disks removed)
BMW AG - TIS
19.01.2013 13:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
