3 Series E46 316i (M43TU) SAL
34 52 516
Removing and installing/replacing control
unit for DSC
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Before starting work, rear out fault memory of ABS/DSC control
unit and print out diagnostic record.
Remove diagnosis socket from fixture and place to one side.
Unfasten plug connection (2) and disconnect.
Release screws (1) and carefully remove control unit (3).
Installation:
Replace micro-encapsulated screws.
Note tightening torque,
Refer to 34 51 1AZ .
RA Removing and installing/replacing control unit for DSC
BMW AG - TIS
19.01.2013 13:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
