3 Series E46 316i (M43TU) SAL
35 40 001
Removing and installing/replacing accelerator
pedal module
Installation:
Accelerator pedal modules for vehicles with manual and automatic
transmissions are different. Accelerator pedal module for
automatic vehicles can be identified by its increased pressure
point in full-load position.
Lever lock downwards with a screwdriver and detach accelerator
pedal module to one side.
Press together lock and detach plug.
Installation:
Slide accelerator pedal module first at bottom (1) and then at top
(2) into guide rails. Mandrel of adapter plate (3) must penetrate
into corresponding opening in accelerator pedal module.
In the end position, the right outer surfaces of the adapter plate
and the accelerator pedal module are flush and the lock of the
adapter plate is snapped into place twice.
RA Removing and installing/replacing accelerator pedal module
BMW AG - TIS
19.01.2013 13:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
