3 Series E46 316i (M43TU) SAL
Use special tool 36 1 030 for testing.
Special tool 36 1 030 consists of:
(1)
Stand 36 1 031
(2)
Post with clamp 36 1 032
(3)
Holder with clamp 36 1 033
(4)
Clamp 36 1 034
(5)
Measuring roller 36 1 035
(6)
Dial gauge 36 1 036
Position special tool 36 1 030 on tire tread.
Turn wheel by hand and measure max. tire radial runout,
refer to Technical Data
Note:
Measuring device must be vertical to tire tread.
Position special tool 36 1 030 on tire sidewall.
Turn wheel by hand and measure max. tire face runout,
refer to Technical Data
Note:
Measuring device must be vertical to tire sidewall.
Never measure on printed text on tire!
If necessary, check disk wheel (rim) for radial and face runout.
RA Checking one road wheel on balancing machine for face and radial runout (wheel r
BMW AG - TIS
19.01.2013 13:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
