3 Series E46 316i (M43TU) SAL
41 00 ...
Frame alignment control dimensions, body, side view, BMW E 46 4-door / 2-door / Touring
/ Convertible
Dimensions in mm.
Tolerance: dimension over 1000 mm
±
2.0 mm.
Tolerance: dimension up to 1000 mm
±
1.0 mm.
Deviating dimension for 2-door in brackets, hinge dimensions not applicable to 2-door.
Dimensions for rear window aperture not applicable to Touring or Convertible
Note:
Only use the indicated values for a rough inspection.
Repairs can only be carried out correctly with the approved set of attachments and with straightening bench.
A
Front impact absorber support, without attached
front trim panel
B
Front spring support
C
Vehicle jack front take-up point
D
Vehicle jack rear take-up point
G
Support for shock absorber, rear
K
Top front hinge shaft
L
Lower front hinge shaft
M
Top rear hinge shaft
N
Lower rear hinge shaft
S
Impact absorber support, rear
RA Frame alignment control dimensions, body, side view, BMW E 46 4-door / 2-door /
BMW AG - TIS
19.01.2013 13:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
