3 Series E46 316i (M43TU) SAL
Clean engine carrier connection and drill holes for plug welding.
Produce reinforcement plates with width (B) of about 60 mm and
coat with zinc dust paint.
Insert reinforcement plates half their width into engine carrier and
plug weld.
Align partial replacement piece with straightening attachment (1)
and plug weld.
Weld engine carrier in welding joint.
Grind down and clean welded seam and welded spots.
Tin out and grind joint until it is smooth.
RA Replacing right engine support (partial replacement in front of front axle) (E46
BMW AG - TIS
19.01.2013 14:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
