3 Series E46 316i (M43TU) SAL
Bulkhead reinforcement.
Expose engine support front section/wheel arch mating surface
and drill out welding spots.
Expose and clean bulkhead reinforcement connections in wheel
arch.
Roughly cut open bulkhead reinforcement.
Remove insulating mat in passenger compartment and drill out
bulkhead reinforcement welding spots from passenger
compartment side.
Remove bulkhead reinforcement.
RA Replacing engine support front section on right
BMW AG - TIS
19.01.2013 14:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
