3 Series E46 316i (M43TU) SAL
Weld holes for plug welding inside B-pillar in cover for side
member.
Weld inside B-pillar to B-pillar.
While doing so, weld open spots of inside B-pillar in area of cover
for side member.
Grind down welded surfaces.
Note:
Do not grind down welding seam thin in area of contact
surface of seatbelt height adjustment fixture.
Seatbelt height adjustment fixture must rest flat.
Coat connection face on outside B-pillar with tin and grind down.
RA Replacing cover for side member, left or right (partial replacement, B-pillar be
BMW AG - TIS
19.01.2013 14:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 17 -
