3 Series E46 316i (M43TU) SAL
Determine and mark cutting line for cover for rear side member:
Measurement (A) = 140 mm from centre of bore for finishing
strip, entrance (1) with dia. 5.5 mm.
Measurement (B) = 140 mm from centre of bore for panel for
cover on side member (2), dia. 9.2 mm.
Cut marked cutting lines on B-pillar and cover for side member.
Drill out welding spots for front and rear door openings.
Remove insulating mats in passenger compartment from cover for
side member.
Expose and open welding spots on underbody.
RA Replacing cover for side member, left or right (partial replacement, B-pillar be
BMW AG - TIS
19.01.2013 14:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
