3 Series E46 316i (M43TU) SAL
Weld reinforcement plate, inside B-pillar.
Weld connection point, inside B-pillar.
Fit individual welding spots so close together that a continuous
seam is created.
Important!
Combustible foam in welding area!
Avoid overheating.
Extract vapours.
Weld holes for plug welding inside B-pillar in cover for side
member.
Weld inside B-pillar to B-pillar.
While doing so, weld open spots of inside B-pillar in area of cover
for side member.
RA Replacing cover for side member, left or right (partial replacement, B-pillar be
BMW AG - TIS
19.01.2013 14:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 17 -
