3 Series E46 316i (M43TU) SAL
Remove trunk floor.
Drill holes in new trunk floor plate for plug welding.
Coat mating surfaces on luggage compartment floor spare part
and on car with zinc dust paint.
Installation:
Carry over the work step shown symmetrically to the other side of
the vehicle.
Clip shaped parts into areas (1) and bond with window adhesive.
Fit in trunk floor plate with straightening attachment and clamp.
Weld luggage compartment floor to mating surface, floor
assembly.
Weld luggage compartment floor in area of spare wheel recess.
RA Replacing complete rear luggage compartment floor (tail panel removed) (E46)
BMW AG - TIS
19.01.2013 14:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
