3 Series E46 316i (M43TU) SAL
Drill out welding spots on connection point, cover for inside side
member/outer wheel arch section.
Caution!
Do not damage sunroof water drainage pipe.
Remove outer section of wheel arch.
Remove remaining metal at connection point
inner wheel arch section
rear panel
rear parcel shelf.
Straighten and grind joint surfaces.
Coat contact surfaces on car with zinc dust paint.
Remove remaining metal at connection point
inside rear parcel shelf
inside C-pillar.
Straighten and grind joint surfaces.
Coat contact surfaces on car with zinc dust paint.
RA Replacing outer section of left or right rear wheel housing (side panel removed)
BMW AG - TIS
19.01.2013 14:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -