3 Series E46 316i (M43TU) SAL
Remove scrap metal.
Straighten and grind joint surfaces.
Drill out welding spots on closing plate, cover for inside side
member (1).
Remove closing plate (2) from inner wheel arch section spare
part.
Straighten and grind connection face.
Fit inner wheel arch section and locate in position.
Note:
Use straightening attachment.
Mark connection faces.
Mark out holes for plug-welding.
Remove inner wheel arch section.
Drill holes for plug welding.
RA Replacing complete rear left wheel arch
BMW AG - TIS
19.01.2013 14:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -