3 Series E46 316i (M43TU) SAL
Weld side panel reinforcement at
outer section of wheel arch
door opening
rear window frame.
Weld holder, sunroof water drainage pipe (2).
Do not weld holder, sunroof water drainage pipe (1), yet.
Weld connection point for wheel arch extension.
Set up sunroof water drainage pipe so that it passes between
outer wheel arch section and C-pillar reinforcement.
The sunroof water drainage pipe must not be touching at any point
otherwise there would be scraping and grinding noises.
Weld holder, sunroof water drainage pipe.
Perform plug welding at side panel reinforcement in area of
connection point (1).
At connection point of C-pillar (2), arrange individual welding spots
so tightly as to create an enclosed seam.
Caution!
Locate welding spots in a way which prevents distortion
caused by heat elongation. Ensure that welded areas have
cooled down sufficiently.
Danger of distortion!
RA Replacing complete rear left wheel arch
BMW AG - TIS
19.01.2013 14:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 17 -
