3 Series E46 316i (M43TU) SAL
At connection point
Cowl panel, side, top
Cover for side member
arrange individual welding spots so tightly together that a sealed
seam is created.
Locate welding spots in a way which prevents distortion caused by
heat elongation. Ensure that welded areas have cooled down
sufficiently.
Grind down welding surfaces on connection points of door pillar
(A-pillar).
Coat connection point, cowl panel, top, and cover for side member
with tin and grind down.
Note:
Carefully seal sunroof water drainage pipe so as to prevent
water from leaking into passenger compartment!
Seal sunroof water drainage pipe with window adhesive.
RA Replacing front left door column (partial replacement) (front side panel removed
BMW AG - TIS
19.01.2013 14:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
