3 Series E46 316i (M43TU) SAL
Determine and mark upper cowl panel cutting line.
Measurement (A) = 140 mm from roof edge.
Measurement (B) = 90 mm from center of bore for trim strip.
1 = Roof edge
2 = Bore for trim strip
Determine and mark out lower cowl panel partition area.
Measurement (A) = 405 mm from center of penultimate bore for
trim strip
Expose connection point in windshield frame and drill out welding
spots.
Drill out welding spots in door opening.
1 = Partition area, lower cowl panel
2 = Partition area, upper cowl panel
RA Replacing left or right cowl panel (partial replacement in front of roof connect
BMW AG - TIS
19.01.2013 14:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
