3 Series E46 316i (M43TU) SAL
At connection for cover for side member, set spots close enough
together to create an enclosed seam.
Locate welding spots in a way which prevents distortion caused by
heat elongation. Ensure that welded areas have cooled down
sufficiently.
Danger of distortion!
Spot weld rear window frame connection.
Mark water drain connection with dots, set brazed seam.
Set brazed seam on spare part in water drain.
RA Replacing rear left side panel (partial replacement, C-pillar)line(E46 saloon/se
BMW AG - TIS
19.01.2013 14:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
