3 Series E46 316i (M43TU) SAL
Weld water drain mating surface from luggage compartment.
Grind down all connection points.
Coat C-pillar mating surface and cover for side member with tin
and grind.
Re-expose bores that were sealed with reinforcement plates.
Cringe edge of wheel arch in indicated area (1).
Seal connection points.
RA Replacing rear left side panel (partial replacement, C-pillar)line(E46 saloon/se
BMW AG - TIS
19.01.2013 14:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -
