3 Series E46 316i (M43TU) SAL
Adjustment of hood lid next to headlights must always be within
specified tolerance range.
Raise hood lid.
Tighten down released screws on hood lid again.
b) Height to side walls, front
Close hood lid slowly.
Locks and retaining hooks must snap correctly into place.
Hood lid must be at same height as front side walls.
Unscrew nut (1) and turn lockpin (2) to adjust height of the
engine hood.
RA Aligning hood lid
BMW AG - TIS
19.01.2013 14:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
