3 Series E46 316i (M43TU) SAL
51 11 701
Replacing bracket for front left or right
bumper (saloon/sedan and touring up to 9/01)
Necessary preliminary tasks:
•
Remove front bumper.
If necessary, mark position of bracket (2) on body.
Unfasten screws (1) and remove bracket (2).
Ideal adjustment:
Gap (A) should be uniform along the full length between bumper
and aperture in body.
Dimension (A) = 5
±
1 mm
RA Replacing bracket for front left or right bumper (saloon/sedan and touring up to
BMW AG - TIS
19.01.2013 14:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
