3 Series E46 316i (M43TU) SAL
Installation:
Height of bumper is adjusted by turning hexagon socket head
screw (1) on impact absorber (2).
Ideal adjustment:
Gap (A) should be uniform along the full length between bumper
and aperture in body.
Dimension (A) = 5
±
1 mm
RA Removing and installing complete front bumper (up to 9/01)
BMW AG - TIS
19.01.2013 14:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
