3 Series E46 316i (M43TU) SAL
51 12 742
Replacing one shock absorber for rear
bumper
Release expansion rivets (1) and remove tray (2).
Installation:
If necessary, remove luggage compartment wheel arch trim
on left.
Version with battery in luggage compartment:
Turn rotary clips (1) through 90
°
.
Feed shelf (2) out of luggage compartment wheel arch trim (3).
Unclip cover (1) on left and right.
Release nuts (1) on inside and remove shock absorber.
Installation:
Tightening Torque 51 12 3AZ.
RA Replacing one shock absorber for rear bumper
BMW AG - TIS
19.01.2013 14:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
