3 Series E46 316i (M43TU) SAL
51 12 000
Removing and installing complete rear
bumper
Special tools required:
•
00 2 150
Note:
Version with trailer coupling:
Remove finisher strip.
All models:
Remove trim on bumper trim at rear.
Sedan and touring:
Stick on fabric adhesive tape (1) below screw to bumper (risk of
damage).
Attach special tool 00 2 150 to ratchet and release screw on
left/right.
Note:
Saloon/sedan with M aerodynamics package only:
Screw can be removed towards bottom.
Installation:
Tightening torque 51 12 2AZ.
Sedan and touring:
Pull bumper (1) towards rear/bottom and remove screw (2)
towards rear/bottom.
RA Removing and installing complete rear bumper
BMW AG - TIS
19.01.2013 14:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
