3 Series E46 316i (M43TU) SAL
51 12 080
Removing and installing/replacing finisher
strip on bumper trim
Remove detent lugs (1) on one side from below, then unclip rest
of finisher strip (2).
Version without Park Distance Control (PDC):
Remove finisher strip (2).
Version with Park Distance Control (PDC):
If necessary, disconnect plug connections (1) from ultrasonic
converters (2) and finisher strip (3).
Replacement only:
If necessary, remove retainers (1) and ultrasonic converter (2).
RA Removing and installing/replacing finisher strip on bumper trim
BMW AG - TIS
19.01.2013 14:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
