3 Series E46 316i (M43TU) SAL
51 12 435
Replacing left or right side molding for rear
bumper
Special tools required:
•
00 9 321
Unclip rubbing strip first at rear then at side with special tool
00 9 321 (fishbone) and remove at an angle towards rear.
Installation:
Insert rubbing strip first at front (1) and then clip into place.
Saloon/sedan, compact:
Installation:
Replace rubbing strip if detent lugs (1) are faulty.
RA Replacing left or right side molding for rear bumper
BMW AG - TIS
19.01.2013 14:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
