3 Series E46 316i (M43TU) SAL
Note:
Steel pin (1) on cover (2)
is secured by retainer (3) of plastic unit (4)
in trim strip.
Slide out retainers (3)
over apertures (1) of trim strip (2).
Remove seals (1) and (3) from trim strip (2).
Installation:
New seals (1) and (3) are longer than trim strip (2).
After inserting, form seals (1) and (3) a little by upsetting
(push together).
Cut seals (1) and (3) an ends to trim strip (2).
Glue ends of seals (1) and (3) with Loctite 380 (sourcing
reference: BMW Parts Service).
Installation:
Align retainers (1) of trim strip (2) to brackets (3) on roof.
RA Replacing trim strip on roof frame at left or right
BMW AG - TIS
19.01.2013 14:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
