3 Series E46 316i (M43TU) SAL
Installation on clip 15 (last clip):
(A):
Snap trim strip (1) into last clip (2) (audible click).
(B):
Slide trim strip (1)
downwards in direction of breastwork (3)
up to stop of retainer (clip mount in trim strip).
Installation on clips 13 and 14:
Snap trim strip (1) into clips (2) (audible double click).
Pull trim strip (1) in area of clips (2)
with both hands towards rear/bottom as far as it will go.
End of trim strip (1) must not rest on paint of breastwork (3).
Installation on remaining clips:
Position trim strip (1) on remaining clips (2)
from rear (A) to front (B) and clip into place (audible click),
do not knock in (risk of damage, denting).
RA Removing and installing/replacing trim strip on roof gutter at left or right
BMW AG - TIS
19.01.2013 14:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
