3 Series E46 316i (M43TU) SAL
51 13 403
Replacing handle strip (on trunk lid)
Remove handle strip,
refer to 51 13 402.
When replaced, the button comes in individual parts
because the panel must be painted in the relevant car
colour.
Lever out light strip (1) on left/right from opening (2) and remove.
Remove light bulb (3).
Remove seal (1) from handle strip (2).
Note:
During removal, do not damage catches (1) of panel (2).
Carefully lever panel (2) with special tool 00 9 322 (plastic
wedge) out of handle strip (3) and remove.
RA Replacing handle strip (on trunk lid)
BMW AG - TIS
19.01.2013 14:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
