3 Series E46 316i (M43TU) SAL
Installation:
If necessary, replace faulty pins (1) of decorative strip (2).
Always replace clips (Hutfix) on instrument panel.
Observe color matching,
refer to first work step.
Model with real wood:
Installation:
If necessary, replace faulty screw-in pins (1) on decorative strip
(2).
Tightening torque, 51 16 8AZ.
Always replace clips (Hutfix) on instrument panel.
Observe color matching,
refer to first work step.
Decorative strip above radio:
Remove decorative strip above glovebox.
Unclip decorative strip (1) with special tool 00 9 321 (fishbone)
(risk of damage).
Installation:
If necessary, replace faulty pin (1) on decorative strip (2).
Always replace clips (Hutfix) on instrument panel.
Observe color matching,
refer to first work step.
RA Replacing a clipped-in trim (decorative strip on panel for instrument panel, fro
BMW AG - TIS
19.01.2013 14:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
