3 Series E46 316i (M43TU) SAL
Insert outside handle (1) and snap towards front into place
(audible click).
Coupé/convertible:
Lever out sealing cap (1) for following adjustment.
Installation:
After installing lock cylinder (51 21 140) and/or cover (51 21
180),
Lever out sealing cap (2).
Tighten adjusting screw (1) on door lock.
Tightening torque, 51 21 4AZ.
Direction of rotation of adjustment screw (1):
Front left door
Front right door
Tighten down adjusting
screw (1) in clockwise
direction, as shown in
illustration.
Tighten down adjusting
screw (1) in
counterclockwise direction.
RA Removing and installing/replacing outside handle on left or right front door (up
BMW AG - TIS
19.01.2013 14:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
