3 Series E46 316i (M43TU) SAL
Pull window cavity cover strip (1) out of door mirror (2) in
direction of arrow.
Installation:
Coat window cavity cover strip (1) with water before fitting.
Window cavity cover strip (1) must be flush at rear to door edge.
Installation:
Seal (1) must be correctly fitted in cover strip (2).
RA Removing and installing or replacing window cavity cover strip on outside of lef
BMW AG - TIS
19.01.2013 14:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
