3 Series E46 316i (M43TU) SAL
Important!
Door striker (lock wedge) must not be greased.
Door lock does not have to be greased until after 100,000 km.
Only replace:
Lift out lock (1) and detach Bowden cable (2) from fixture (3).
Remove Bowden cable nipple (4) from lever (5).
Note:
The Bowden cable mount for the inside door handle is the same
for all construction versions. The construction version up to
09/2000 is shown here.
Only replace:
Turn linkage for locking knob (1) and detach from lever (2).
Installation:
Following parts must not be damaged:
1
Mount for paddle of lock barrel (driver's side only)
2
Mount for Bowden cable of outside door handle
3
Mount for Bowden cable of inside door handle
The illustration shows the left driver's door lock on the Saloon.
RA Removing and installing/replacing door lock in left or right front door (from 09
BMW AG - TIS
19.01.2013 14:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
