3 Series E46 316i (M43TU) SAL
51 21 090
Removing and installing/replacing door lock
in left or right front door (up to 09/00)
Note:
The work is identical for all E46 models up to year of
manufacture 09/2000. The components are simply adapted to
the different door geometries.
A 4 mm A/F Allen key is required for adjustment.
Detach power window rail at rear (do not remove).
Driver's side only:
Remove complete lock cylinder.
Note:
Coupé up to 25.05.1999 only:
In event of malfunction at door lock,
refer to Service Information.
Disconnect plug connection (1) on door lock (2).
Release screws (1).
Remove door lock (2) with linkage (3).
Installation:
Insert linkage for locking knob through opening in inner door plate.
Do not bend linkage (3).
Make sure that the lock lever is inserted between the "outside
door handle" support member and outer skin.
Replace screws (1).
Tightening torque, 51 21 1AZ.
RA Removing and installing/replacing door lock in left or right front door (up to 0
BMW AG - TIS
19.01.2013 14:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
