3 Series E46 316i (M43TU) SAL
Removing cover (1) on outside handle:
A
Pull cover (1) approx. 1 to 2 mm towards rear.
B
Detach cover (1) with lock cylinder (2) towards outside.
Installation:
Notch (2) on paddle mount (1) must be secured in catch (3).
Only in this position will installation of the lock barrel be
guaranteed.
Replacement only:
Lever out catches (1) and detach cover (2) from lock cylinder (3).
Installation:
Catches (1) on cover (2) must not be damaged.
3
Lock cylinder
RA Removing and installing/replacing complete lock cylinder in left or right front
BMW AG - TIS
19.01.2013 14:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
