3 Series E46 316i (M43TU) SAL
Caution!
Do not close door while installing door lock and cover.
It is not possible to open the door when the adjusting screw is
released.
Secure door against closing.
Installation:
Left door lock of rear door:
Slacken adjusting screw (1) on door lock (2)
(turn counterclockwise, as shown in illustration),
the Bowden cable mount (3) can thus be moved.
Installation:
Right door lock of rear door:
Slacken adjusting screw (1) on door lock (2)
(turn clockwise, as shown in illustration),
the Bowden cable mount (3) can thus be moved.
Note:
The Bowden cable mount (3) is still shown in the illustration as
lock lever (3), but is similar to that in Fig. R51 2807.
Installation:
Lever out sealing cap (1).
Tighten down adjusting screw (2) on door lock and fit sealing
RA Removing and installing/replacing door lock in left or right rear door (from 09/
BMW AG - TIS
19.01.2013 14:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
