3 Series E46 316i (M43TU) SAL
Replacement only:
Remove seals (1) and (2) for outside handle.
Installation:
For installation of the outside handle, the lock mechanism (1) must
be engaged on the outside (as shown in illustration).
Installation of outside handle possible.
If the lock mechanism (1) is on the inside (as shown in illustration),
the outside handle cannot be fitted.
For installation, the lock mechanism (1) must be moved to the
installation position.
If necessary, move lock mechanism (2) outwards/towards rear to
installation position with an offset screwdriver (1).
RA Removing and installing/replacing outside handle on left or right rear door (up
BMW AG - TIS
19.01.2013 14:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
