3 Series E46 316i (M43TU) SAL
Adhere to cutting depths as specified.
(A) = 24 mm
(B) = 18 mm
(C) = 16 mm
(D) = 20 mm
Carefully cut into corner points.
Fit straight blade with adjustable roller (sourcing reference: BMW
Parts Service) on tool and set dimension (X).
Adjust measurement (X), as specified in previous work step.
Note:
If necessary, resharpen knife with machine running.
Carefully insert knife blade between body and door window.
Run handle of knife parallel to door window.
Pull door window outwards to remove.
Cut off old glue in body opening to a thickness of approx.
0.5 mm.
To avoid paintwork damage, carefully cut off glue residue with
scalpel.
Remove glue tape all round. Clean body aperture with 2-propanol.
RA Replacing left or right fixed door window in rear window frame
BMW AG - TIS
19.01.2013 15:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -